============================ Breaking Changes ============================
Announcements | Discussions | Wiki | Credits | Contributing | Roadmap
project.nvim is a Neovim plugin written in Lua that,
under configurable conditions, automatically sets the user's cwd to the current project root
and also allows users to manage, access and selectively include their projects in a history.
This plugin allows you to navigate through projects, "bookmark" and/or discard them, according to your needs.
Note
This was originally forked from ahmedkhalf/project.nvim. Ever since I've decided to extend it and address issues.
I will be maintaining this plugin for the foreseeable future!
Important
I'm looking for other maintainers in case I'm unable to keep this repo up to date!
Checkhealth Support Example
project_checkhealth.mp4
Telescope Integration Example
project_telescope.mp4
Fzf-Lua Integration Example
project_fzf_lua.mp4
Show these much love!
nvim-telescope/telescope-project.nvimfolke/snacks.nvimcoffebar/neovim-projectLintaoAmons/cd-project.nvimwsdjeg/rooter.nvim
- Automatically sets the
cwdto the project root directory using either pattern matching (LSP optionally) - Users can control whether to run this or not by filetype/buftype
- Functional
checkhealthhook:checkhealth project - Vim help documentation
:h project-nvim - Logging capabilities
:ProjectLog,:ProjectLogClear vim.uimenu support- Telescope Integration
:Telescope projects Fzf-LuaIntegrationnvim-treeIntegrationneo-treeIntegrationmini.starterIntegration
Important
Requirements:
- Neovim >= 0.11.0
fd(REQUIRED FOR SESSION MANAGEMENT)fzf-lua(OPTIONAL, RECOMMENDED)telescope.nvim(OPTIONAL, RECOMMENDED)plenary.nvimtelescope-file-browser.nvim(OPTIONAL, to replace the builtinfind_files)
nvim-tree.lua(OPTIONAL)neo-tree.nvim(OPTIONAL)
Use any plugin manager of your choosing. There currently instructions for the following.
Tip
If you want to add instructions for your plugin manager of preference please raise a BLANK ISSUE.
if has('nvim-0.11')
Plug 'DrKJeff16/project.nvim'
" OPTIONAL
Plug 'nvim-telescope/telescope.nvim' | Plug 'nvim-lua/plenary.nvim'
Plug 'ibhagwan/fzf-lua'
lua << EOF
require('project').setup()
EOF
endif{
'DrKJeff16/project.nvim',
version = false, -- Get the latest release
dependencies = { -- OPTIONAL
'nvim-lua/plenary.nvim',
'nvim-telescope/telescope.nvim',
'ibhagwan/fzf-lua',
},
---@module 'project'
---@type Project.Config.Options
opts = {},
}Tip
If you wish to lazy-load this plugin:
{
'DrKJeff16/project.nvim',
version = false, -- Get the latest release
cmd = { -- Lazy-load by commands
'Project',
'ProjectAdd',
'ProjectConfig',
'ProjectDelete',
'ProjectHistory',
'ProjectRecents',
'ProjectRoot',
'ProjectSession',
},
dependencies = { -- OPTIONAL
'nvim-lua/plenary.nvim',
'nvim-telescope/telescope.nvim',
'ibhagwan/fzf-lua',
},
---@module 'project'
---@type Project.Config.Options
opts = {},
}if vim.fn.has('nvim-0.11') == 1 then
require('pckr').add({
{
'DrKJeff16/project.nvim',
requires = { -- OPTIONAL
'nvim-lua/plenary.nvim',
'nvim-telescope/telescope.nvim',
'ibhagwan/fzf-lua',
},
config = function()
require('project').setup()
end,
};
})
endlocal paq = require('paq')
paq({
'savq/paq-nvim',
'DrKJeff16/project.nvim',
'nvim-lua/plenary.nvim', -- OPTIONAL
'nvim-telescope/telescope.nvim', -- OPTIONAL
'ibhagwan/fzf-lua', -- OPTIONAL
})
require('project.nvim').setup()# Global install
luarocks install project.nvim
# Local install
luarocks install --local project.nvimTo enable the plugin you must call setup():
require('project').setup()Tip
You can find these in project/config/defaults.lua.
Note
The Project.Telescope.ActionNames type is an alias for:
---@alias Project.Telescope.ActionNames
---|'browse_project_files'
---|'change_working_directory'
---|'delete_project'
---|'find_project_files'
---|'help_mappings'
---|'recent_project_files'
---|'search_in_project_files'setup()comes with these defaults.
{
---Options for logging utility.
--- ---
---@type Project.Config.Logging
log = {
---If `true`, it enables logging in the same directory in which your
---history file is stored.
--- ---
---Default: `false`
--- ---
---@type boolean
enabled = false,
---The maximum logfile size (in megabytes).
--- ---
---Default: `1.1`
--- ---
---@type number
max_size = 1.1,
---Path in which the log file will be saved.
--- ---
---Default: `vim.fn.stdpath('state')`
--- ---
---@type string
logpath = vim.fn.stdpath('state'),
},
---Table of options used for `fzf-lua` integration
--- ---
---@type Project.Config.FzfLua
fzf_lua = {
---Determines whether the `fzf-lua` integration is enabled.
---
---If `fzf-lua` is not installed, this won't make a difference.
--- ---
---Default: `false`
--- ---
---@type boolean
enabled = false,
},
---Determines in what filetypes/buftypes the plugin won't execute.
---It's a table with two fields:
---
--- - `ft`: A string array of filetypes to exclude
--- - `bt`: A string array of buftypes to exclude
---
---CREDITS TO [@Zeioth](https://github.com/Zeioth)!:
---[`Zeioth/project.nvim`](https://github.com/Zeioth/project.nvim/commit/95f56b8454f3285b819340d7d769e67242d59b53)
--- ---
---The default value for this one can be found in the project's `README.md`.
--- ---
---@type { ft: string[], bt: string[] }
disable_on = {
ft = {
'',
'TelescopePrompt',
'TelescopeResults',
'alpha',
'checkhealth',
'lazy',
'minimap', -- from `mini.map`
'notify',
'packer',
'qf',
},
bt = {
'help',
'nofile',
'terminal',
},
},
---If `true` your root directory won't be changed automatically,
---so you have the option to manually do so
---using the `:ProjectRoot` command.
--- ---
---Default: `false`
--- ---
---@type boolean
manual_mode = false,
---Methods of detecting the root directory. `'lsp'` uses the native Neovim
---LSP, while `'pattern'` uses vim-rooter like glob pattern matching. Here
---order matters: if one is not detected, the other is used as fallback. You
---can also delete or rearrange the detection methods.
---
---The detection methods get filtered and rid of duplicates during runtime.
--- ---
---Default: `{ 'pattern' }`
--- ---
---@type ('lsp'|'pattern')[]
detection_methods = { 'pattern' },
---All the patterns used to detect root dir, when **'pattern'** is in
---detection_methods.
---
---See `:h project-nvim.pattern-matching`
--- ---
---Default: `{ '.git', '.github', '_darcs', '.hg', '.bzr', '.svn', 'Pipfile' }`
--- ---
---@type string[]
patterns = {
'.git',
'.github',
'_darcs',
'.hg',
'.bzr',
'.svn',
'Pipfile',
},
---Sets whether to use Pattern Matching rules on the LSP.
---
---If `false`, the Pattern Matching will only apply to the `pattern` detection method.
--- ---
---Default: `true`
--- ---
---@type boolean
allow_patterns_for_lsp = true,
---Determines whether a project will be added if its project root is owned by a different user.
---
---If `false`, it won't add a project if its root is not owned by the
---current nvim `UID` **(UNIX only)**.
--- ---
---Default: `true`
--- ---
---@type boolean
allow_different_owners = true,
---If enabled, set `vim.opt.autochdir` to `true`.
---
---This is disabled by default because the plugin implicitly disables `autochdir`.
--- ---
---Default: `false`
--- ---
---@type boolean
enable_autochdir = false,
---The history size. (by @acristoffers)
---
---This will indicate how many entries will be written to the history file.
---Set to `0` for no limit.
--- ---
---Default: `100`
--- ---
---@type integer
historysize = 100
---Table of options used for the telescope picker.
--- ---
---@type Project.Config.Telescope
telescope = {
---Determines whether the `telescope` picker should be called
---from the `setup()` function.
---
---If telescope is not installed, this doesn't make a difference.
---
---Note that even if set to `false`, you can still load the extension manually.
--- ---
---Default: `false`
--- ---
---@type boolean
enabled = false,
---Determines whether the newest projects come first in the
---telescope picker (`'newest'`), or the oldest (`'oldest'`).
--- ---
---Default: `'newest'`
--- ---
---@type 'oldest'|'newest'
sort = 'newest',
---If you have `telescope-file-browser.nvim` installed, you can enable this
---so that the Telescope picker uses it instead of the `find_files` builtin.
---
---If `true`, use `telescope-file-browser.nvim` instead of builtins.
---In case it is not available, it'll fall back to `find_files`.
--- ---
---Default: `false`
--- ---
---@type boolean
prefer_file_browser = false,
---Set this to `true` if you don't want the file picker to appear
---after you've selected a project.
---
---CREDITS: [UNKNOWN](https://github.com/ahmedkhalf/project.nvim/issues/157#issuecomment-2226419783)
--- ---
---Default: `false`
--- ---
---@type boolean
disable_file_picker = false,
---Table of mappings for the Telescope picker.
---
---Only supports Normal and Insert modes.
--- ---
---Default: check the README
--- ---
---@type table<'n'|'i', table<string, Project.Telescope.ActionNames>>
mappings = {
n = {
b = 'browse_project_files',
d = 'delete_project',
f = 'find_project_files',
r = 'recent_project_files',
s = 'search_in_project_files',
w = 'change_working_directory',
},
i = {
['<C-b>'] = 'browse_project_files',
['<C-d>'] = 'delete_project',
['<C-f>'] = 'find_project_files',
['<C-r>'] = 'recent_project_files',
['<C-s>'] = 'search_in_project_files',
['<C-w>'] = 'change_working_directory',
},
},
},
---Make hidden files visible when using any picker.
--- ---
---Default: `false`
--- ---
---@type boolean
show_hidden = false,
---Table of lsp clients to ignore by name,
---e.g. `{ 'efm', ... }`.
---
---If you have `nvim-lspconfig` installed **see** `:h lspconfig-all`
---for a list of servers.
--- ---
---Default: `{}`
--- ---
---@type string[]
ignore_lsp = {},
---Don't calculate root dir on specific directories,
---e.g. `{ '~/.cargo/*', ... }`.
---
---For more info see `:h project-nvim.pattern-matching`.
--- ---
---Default: `{}`
--- ---
---@type string[]
exclude_dirs = {},
---If `false`, you'll get a _notification_ every time
---`project.nvim` changes directory.
---
---This is useful for debugging, or for players that
---enjoy verbose operations.
--- ---
---Default: `true`
--- ---
---@type boolean
silent_chdir = true,
---Determines the scope for changing the directory.
---
---Valid options are:
--- - `'global'`: All your nvim `cwd` will sync to your current buffer's project
--- - `'tab'`: _Per-tab_ `cwd` sync to the current buffer's project
--- - `'win'`: _Per-window_ `cwd` sync to the current buffer's project
--- ---
---Default: `'global'`
--- ---
---@type 'global'|'tab'|'win'
scope_chdir = 'global',
---Hook to run before attaching to a new project.
---
---It recieves `target_dir` and, optionally,
---the `method` used to change directory.
---
---CREDITS: @danilevy1212
--- ---
---Default: `function(target_dir, method) end`
--- ---
---@param target_dir? string
---@param method? string
before_attach = function(target_dir, method) end,
---Hook to run after attaching to a new project.
---**_This only runs if the directory changes successfully._**
---
---It recieves `dir` and, optionally,
---the `method` used to change directory.
---
---CREDITS: @danilevy1212
--- ---
---Default: `function(dir, method) end`
--- ---
---@param dir? string
---@param method? string
on_attach = function(dir, method) end,
---The path where `project.nvim` will store the project history directory,
---containing the project history in it.
---
---For more info, run `:lua vim.print(require('project').get_history_paths())`
--- ---
---Default: `vim.fn.stdpath('data')`
--- ---
---@type string
datapath = vim.fn.stdpath('data'),
}project.nvim comes with a vim-rooter-inspired pattern matching expression engine
to give you better handling of your projects.
For your convenience here come some examples:
-
To specify the root is a certain directory, prefix it with
=:patterns = { '=src' }
-
To specify the root has a certain directory or file (which may be a glob), just add it to the pattern list:
patterns = { '.git', '.github', '*.sln', 'build/env.sh' }
-
To specify the root has a certain directory as an ancestor (useful for excluding directories), prefix it with
^:patterns = { '^fixtures' }
-
To specify the root has a certain directory as its direct ancestor / parent (useful when you put working projects in a common directory), prefix it with
>:patterns = { '>Latex' }
-
To exclude a pattern, prefix it with
!:patterns = { '!.git/worktrees', '!=extras', '!^fixtures', '!build/env.sh' }
Important
- Make sure to put your pattern exclusions first, and then the patterns you DO want included.
- If you have
allow_patterns_for_lspenabled, it will also work somewhat for your LSP clients.
Make sure these flags are enabled to support nvim-tree.lua:
require('nvim-tree').setup({
sync_root_with_cwd = true,
respect_buf_cwd = true,
update_focused_file = {
enable = true,
update_root = true,
},
})You can use :Neotree filesystem ... when changing a project:
vim.keymap.set('n', '<YOUR-TOGGLE-MAP>', ':Neotree filesystem toggle reveal_force_cwd<CR>', opts)
vim.keymap.set('n', '<YOUR-SHOW-MAP>', ':Neotree filesystem show reveal_force_cwd<CR>', opts)
vim.keymap.set('n', '<YOUR-FLOAT-MAP>', ':Neotree filesystem float reveal_force_cwd<CR>', opts)
-- ... and so onNote
Not 100% certain whether the reveal_force_cwd flag is necessary,
but better safe than sorry!
To enable telescope.nvim integration use the following
code in your config:
require('telescope').setup(...)
require('telescope').load_extension('projects')After that you can now call it from the command line:
:Telescope projectsTip
You can also configure the picker when calling require('telescope').setup()
CREDITS: @ldfwbebp: ahmedkhalf/project.nvim#160
require('telescope').setup({
extensions = {
projects = {
prompt_prefix = "󱎸 ",
layout_strategy = "horizontal",
layout_config = {
anchor = "N",
height = 0.25,
width = 0.6,
prompt_position = "bottom",
},
},
},
})project.nvim comes with the following mappings for Telescope:
| Normal mode | Insert mode | Action |
|---|---|---|
f |
<C-f> |
find_project_files |
b |
<C-b> |
browse_project_files |
d |
<C-d> |
delete_project |
s |
<C-s> |
search_in_project_files |
r |
<C-r> |
recent_project_files |
w |
<C-w> |
change_working_directory |
Tip
You can find the Actions in telescope/_extensions/projects/actions.lua.
If you use nvim-mini/mini.starter you can include the
following snippet in your MiniStarter setup:
require('mini.starter').setup({
evaluate_single = true,
items = {
{ name = 'Projects', action = 'Project', section = 'Projects' }, -- Runs `:Project`
{ name = 'Recent Projects', action = 'ProjectRecents', section = 'Projects' }, -- `:ProjectRecents`
-- Other items...
},
})These are the user commands you can call from the cmdline:
The :Project command will open a UI window pointing to all the useful operations
this plugin can provide. This one is subject to change, just as vim.ui is.
Tip
See commands.lua for more info.
Important
This command works ONLY if you have fzf-lua installed and loaded
The :ProjectFzf command is a dynamicly enabled User Command that runs
project.nvim through fzf-lua.
For now it just executes require('project').run_fzf_lua().
Tip
See commands.lua for more info.
Important
This command works ONLY if you have telescope.nvim installed and loaded
The :ProjectTelescope command is a dynamicly enabled User Command that runs
the Telescope projects picker.
A shortcut, to be honest.
Tip
See commands.lua for more info.
The :ProjectHealth command runs :checkhealth project in a single command.
Tip
See commands.lua for more info.
The :ProjectHistory command opens the project.nvim history file in a new tab,
which can be exited by pressing q in Normal Mode.
If a [!] is supplied at the end of the command (i.e. :ProjectHistory!), then it'll close
any instance of a previously opened history file, if found. Otherwise nothing will happen.
Tip
See history.lua for more info.
Important
This command will not be available unless you set log.enabled = true
in your setup().
The :ProjectLog command opens the project.nvim log file in a new tab,
which can be exited by pressing q in Normal Mode.
If a [!] is supplied at the end of the command (i.e. :ProjectLog!), then it'll close
any instance of a previously opened log file, if found. Otherwise nothing will happen.
Tip
See log.lua for more info.
Important
This command will not be available unless you set log.enabled = true
in your setup().
The :ProjectLogClear command will delete all the contents of your log file,
assuming there is one.
If this is called from a logfile tab, then it will attempt to close it.
Note
Once this command is called no more logs will be written for your current Neovim session. You will have to restart.
You could set vim.g.project_log_cleared to a value different to 1,
BUT THIS SOLUTION IS NOT TESTED FULLY. EXPECT WEIRD BEHAVIOUR IF YOU DO THIS!
Tip
See log.lua for more info.
The :ProjectAdd command is a manual hook that opens a prompt to input any
directory through a UI prompt, to be saved to your project history.
If your prompt is valid, your cwd will be switched to said directory.
Adding a [!] will set the prompt to your cwd.
Note
This is particularly useful if you've enabled manual_mode in setup().
Tip
See commands.lua for more info.
The :ProjectRoot command is a manual hook to set the working directory to the current
file's root, attempting to use any of the setup() detection methods
set by the user.
The command is like doing the following in the cmdline:
:lua require('project.api').on_buf_enter()Tip
See commands.lua for more info.
The :ProjectConfig command will open your current config in a floating window,
making it easier to access.
To exit the window you can either press q in normal mode or by runnning :ProjectConfig!.
Tip
See commands.lua for more info.
The :ProjectDelete command is a utility to delete your projects.
If no arguments are given, a popup with a list of your current projects will be opened.
If one or more arguments are passed, it will expect directories separated
by a space. The arguments have to be directories that are returned by get_recent_projects().
The arguments can be relative, absolute or un-expanded (~/path/to/project).
The command will attemptto parse the args and, unless a ! is passed to the command
(:ProjectDelete!). In that case, invalid args will be ignored.
If there's a successful deletion, you'll recieve a notification denoting success.
Note
USAGE
" Vim command line
:ProjectDelete[!] [/path/to/first [/path/to/second [...]]]Tip
- See
:h :ProjectDeletefor more info. - See
commands.luafor more info.
Important
This command requires fd to be installed for it to work!
The :ProjectSession command opens a custom picker with a selection of
your current session projects (stored in History.session_projects). Bear in mind this table gets
filled on runtime.
If you select a session project, your cwd will be changed to what you selected.
If the command is called with a ! (:ProjectSession!) the UI will close.
Otherwise, another custom UI picker will appear for you to select the files/dirs.
Selecting a directory will open another UI picker with its contents, and so on.
Tip
- See
popup.luafor more info.
The API can be found in api.lua.
get_project_root() is an API utility for finding out
about the current project's root, if any:
---@type string?, string?
local root, lsp_or_method = require('project').get_project_root()You can get a list of recent projects by running the code below:
local recent_projects = require('project').get_recent_projects() ---@type string[]
vim.notify(vim.inspect(recent_projects))Where get_recent_projects() returns either an empty table {}
or a string array { '/path/to/project1', ... }.
If setup() has been called, it returns a table containing the currently set options.
Otherwise it will return nil.
local config = require('project').get_config()
-- Using `vim.notify()`
vim.notify(vim.inspect(config))
-- Using `vim.print()`
vim.print(config)If no valid args are passed to this function, it will return the following dictionary:
---@type fun(path: ('datapath'|'projectpath'|'historyfile')?): string|{ datapath: string, projectpath: string, historyfile: string }
local get_history_paths = require('project').get_history_paths
-- A dictionary table containing all return values below
vim.print(get_history_paths())
--- { datapath = <datapath>, projectpath = <projectpath>, historyfile = <historyfile> }Otherwise, if either 'datapath', 'projectpath' or 'historyfile' are passed,
it will return the string value of said arg:
-- The directory where `project` sets its `datapath`
vim.print(get_history_paths('datapath'))
-- The directory where `project` saves the project history
vim.print(get_history_paths('projectpath'))
-- The path to where `project` saves its recent projects history
vim.print(get_history_paths('historyfile'))A set of utilities that get repeated across the board.
Tip
You can import them the follow way:
local ProjUtil = require('project.utils.util')See util.lua for further reference.
Note
These utilities are in part inspired by my own utilities found in Jnvim,
my own Nvim configuration; particularly the User API (WIP).
If you're in a UNIX environment, make sure you have read, write and access permissions
(rwx) for the projectpath directory.
Important
The default value is vim.fn.stdpath('data')/project_nvim.
See :h stdpath() for more info.
Tip
You can get the value of projectpath by running the following in the cmdline:
:lua vim.print(require('project').get_history_paths('projectpath'))If you lack the required permissions for that directory, you can either:
- Delete that directory (RECOMMENDED)
- Run
chmod 755 <project/path>(NOT SURE IF THIS WILL FIX IT)